Need an air fill?
We fill: SCUBA tanks, Paintball tanks, and SCBA tanks with current hydro test and applicable visual inspection.
Need Your Equipment Serviced?
Prices below include labor only. Parts and taxes added when work is completed.
| Service |
Price |
Description |
| Bouyancy Compensator (BCD) |
$30 |
- Completely disassemble, clean and carefully inspect all parts for damage, corrosion and wear.
- Replace any parts as appropriate.
- Reassemble and test.
|
| Cylinder, Visual Inspection (VIP) |
$15 |
- Inspect to standards of Professional Scuba Inspectors, Inc. (PSI)
- If appropriate, use an eddy current device to further evaluate the threads.
- Clean the neck/valve threads, lubricate and install new O-ring.
- Re-install valve on cylinder, and test for leaks.
- Affix evidence of inspection decal.
|
| Cylinder, hydrostatic test (HYDRO) |
$40 |
- Test the cylinder at a DOT-authorized hydrostatic test facility.
- Rinse cylinder interior and thoroughly dry.
This service normally combined with a visual inspection is $50 |
| Cylinder, interior tumble |
$35 |
- Dry tumble cylinder with abrasive appropriate for cylinder composition.
- Blow out cylinder with high pressure air to remove all dust.
|
| Cylinder and Valve Oxygen service Plus cost of a Nitrox fill @ $12 |
$36 |
- Wash cylinder interior with environmentally safe detergents to remove hydrocarbon contamination.
- Rinse cylinder interior and thoroughly dry.
- Completely disassemble valve, clean and carefully inspect all parts for damage, corrosion and wear.
- Replace any parts as appropriate; always replace the burst disk and all O-rings using oxygen-compatible products.
|
| Regulator PM, per stage. Plus cost of parts kits |
$30 |
- Maintain 1st and 2nd stage, additional 2nd stage, SPG and BCD Hose end.
- Completely disassemble, clean and carefully inspect all parts for damage, corrosion and wear.
- Replace any parts as appropriate; always replace all soft parts and seats.
- Assemble, test and tune to factory specifications.
- Check the submersible pressure gauge for accuracy across a range of pressures.
- Inspect the high-pressure swivel and replace O-rings.
- Inspect all hoses, clean and lubricate the BCD hose end.
Note: pricing is per stage. For example, a regulator with a 1st stage, 2nd stage and alternate 2nd stage would be a total of three regulator stages with 3 parts kits. |
| Computer battery Plus cost of battery |
$10 |
Inspect O-ring and replace if appropriate. |
